Calculate Your Marks, Percentage & Grade

Whether you call it a marks calculator, a grade calculator, or a test score calculator, the math is the same: enter what you scored, and instantly see your percentage, letter grade, and GPA. Pick a grading scale below, then choose the mode that matches what you're trying to work out.

Grading scales vary by school, college, and country โ€” pick the one closest to yours, or set your own cutoffs with Custom.
Subject
Marks / Points Obtained
Total Marks / Points
Subject 1
Subject 2
Your Percentage & Grade
0.00%
Enter your marks for each subject to calculate.

Use this when homework, quizzes, midterms, and a final each count for a different share of your course grade.

Your Weighted Grade
0.00%
Enter each category's grade and weight to calculate.

Find out what score you need on your final exam to reach a target overall grade.

Current Grade
Final Exam Weight
Target Grade
Score Needed on Your Final
--
Enter your current grade, final exam weight, and target grade.

See how many questions you can get wrong on a test and still hit your target grade.

Questions You Can Miss
0
Enter the total number of questions and a target grade.

What Is a Marks Calculator?

A marks calculator โ€” sometimes called a grade calculator or test score calculator, depending on where you're studying โ€” adds up the marks or points you scored and works out your overall percentage, letter grade, and GPA. It's useful for report cards, college applications, and simply tracking how a class is going before the final exam.

In the US, students usually think in terms of points earned out of points possible on an assignment or test. In India, Pakistan, and many other countries, the same calculation is usually described as marks obtained out of total marks. This tool works either way โ€” enter your numbers and it converts them into a percentage and grade automatically.

Marks Calculator for Students Worldwide

Grading rules differ by country, school, and even course โ€” so this calculator doesn't force one scale on everyone. Pick the region closest to yours below (it sets the grading scale above automatically), or use Custom if none of them quite match your institution.

This calculator is an independent tool and isn't affiliated with, or endorsed by, any school, board, or university named on this page โ€” they're mentioned only as examples of the kind of grading system each mode is built for. Always confirm exact cutoffs and formulas with your own institution.

How to Calculate Test Score Percentage

Percentage Formula
Percentage = (Marks Obtained ÷ Total Marks) × 100

For example, if you scored 42 out of 50 on a test:

Example
42 ÷ 50 × 100 = 84%

On the common US scale that's a B; on a percentage-division scale that's a First Division score. Your own school's cutoffs may place it slightly differently โ€” that's exactly what the Custom scale option above is for.

How Weighted Grades Work

Many college courses don't treat every assignment equally โ€” homework might be 20% of your grade, a midterm 30%, and the final exam 50%. To calculate a weighted grade, multiply each category's grade by its weight, add the results together, and divide by the total weight:

Weighted Grade Formula
Weighted Grade = Σ (Category Grade × Category Weight) ÷ Σ Weights

The Weighted Grade tab above does this automatically โ€” just list your categories with their grade and weight.

What Grade Do I Need on My Final?

If you already know your current grade going into the final exam, you can work backward to find the score you need. Enter your current grade, how much the final is worth, and your target overall grade in the Final Grade Needed tab, and the calculator solves for the score you need on that last exam. It'll also tell you honestly if the target isn't reachable โ€” for example, if you'd need more than 100%.

How Many Questions Can I Miss and Still Get an A?

This depends on the total number of questions and the percentage cutoff for an A at your school. For a 50-question test with a 93% cutoff for an A:

Example
50 × 0.93 = 46.5 โ†’ round up to 47 correct answers needed
50 โˆ’ 47 = 3 questions you can miss

The Questions I Can Miss tab does this calculation for any number of questions and any target grade, using whichever grading scale you've selected above.

U.S. Letter Grade & GPA Scale

There is no single universal grading scale in the United States โ€” cutoffs vary by school, college, and instructor. The table below shows a commonly used reference scale.

Percentage Letter Grade GPA
93โ€“100%A4.0
90โ€“92%Aโˆ’3.7
87โ€“89%B+3.3
83โ€“86%B3.0
80โ€“82%Bโˆ’2.7
77โ€“79%C+2.3
73โ€“76%C2.0
70โ€“72%Cโˆ’1.7
67โ€“69%D+1.3
63โ€“66%D1.0
60โ€“62%Dโˆ’0.7
Below 60%F0.0
Note: Grading scales vary by school, college, course, and country. This table is a common reference, not a universal standard โ€” always check your own syllabus or grading policy for exact cutoffs.

UK Degree Classification

UK schools and universities typically report a percentage mark and classify it into a degree class rather than a letter grade:

PercentageClassification
70% and aboveFirst Class Honours (1st)
60โ€“69%Upper Second Class Honours (2:1)
50โ€“59%Lower Second Class Honours (2:2)
40โ€“49%Third Class Honours
Below 40%Fail
Note: individual UK universities and courses can set their own boundaries, and a module mark isn't always calculated the same way as a final degree classification. Check your own institution's regulations for borderline cases.

India: Percentage, Division & CGPA

Indian schools and universities commonly report results as a percentage classified into a division, or as a CGPA on a 10-point scale:

PercentageCommon Classification
80% and aboveDistinction
60โ€“79%First Division
45โ€“59%Second Division
33โ€“44%Third Division / Pass
Below 33%Fail

There is no single official CGPA-to-percentage formula used across every Indian university. CBSE and many UGC-affiliated colleges use:

Most Common Formula (CBSE / UGC)
Percentage = CGPA × 9.5
Note: several universities โ€” including Anna University, VTU, and some others โ€” use a ×10 multiplier or their own formula instead. Check your marksheet or your university's official notification before relying on a converted percentage for an application.

Pakistan: HEC Grading Scale & GPA

Most HEC-recognised Pakistani universities grade on a 4.0 GPA scale using percentage bands close to this table:

PercentageGradeGPA
85โ€“100%A4.00
80โ€“84%Aโˆ’3.66
75โ€“79%B+3.33
71โ€“74%B3.00
67โ€“70%Bโˆ’2.66
64โ€“66%C+2.33
61โ€“63%C2.00
58โ€“60%Cโˆ’1.66
54โ€“57%D+1.33
50โ€“53%D1.00
Below 50%F0.00
Note: this reflects the HEC's general 4.0-scale framework, but universities such as NUST, LUMS, or COMSATS may publish slightly different percentage-to-GPA bands in their own handbooks โ€” always check yours. Matric and FSc boards (BISE Lahore, FBISE, and others) also use their own separate grading rules, which have been revised in recent years.

Europe: ECTS Grade Scale

The European Credit Transfer System (ECTS) exists to make grades comparable across countries โ€” but unlike the scales above, an ECTS grade is normally based on where a student ranks against their own cohort, not a fixed percentage cutoff. The table below is a commonly cited illustrative comparison, not an official conversion:

Illustrative %ECTS GradeMeaning
90โ€“100%AExcellent
80โ€“89%BVery Good
65โ€“79%CGood
55โ€“64%DSatisfactory
50โ€“54%ESufficient
Below 50%FX/FFail
Note: each university sets its own local-grade-to-ECTS table, and true ECTS grading is typically statistical (based on your rank among peers), not percentage-based. Use this only as a rough reference and check your institution's official ECTS conversion table for anything official.

Points-Based vs. Percentage-Based Grading

Some teachers grade in raw points (say, 42 points out of a possible 50), while others record grades directly as a percentage or letter. The two describe the same thing โ€” a points-based grade always converts to a percentage the same way: divide points earned by points possible, then multiply by 100. Whichever language your school uses, the Marks / Test Score tab above accepts either.

How Does This Calculator Work?

01

Pick a Mode

Choose Marks/Test Score, Weighted Grade, Final Grade Needed, or Questions I Can Miss.

02

Enter Your Numbers

Add subjects, categories, or exam details โ€” add as many rows as you need.

03

Get Your Result

See your percentage, letter grade, GPA, or the score you still need.

Frequently Asked Questions

Divide the marks or points you obtained by the total marks or points possible, then multiply by 100. Across several subjects or assignments, add up all the marks obtained and all the totals first, then apply the same formula.

Use Percentage = (Points Earned รท Points Possible) ร— 100. For example, 18 out of 20 points is 90%. The Marks / Test Score tab above does this instantly for one or several tests at once.

On the common US scale, 90% is generally an Aโˆ’, 85% a B, 80% a Bโˆ’, and 75% a C. On a percentage-division scale, 90% and 85% are usually a Distinction, while 80% and 75% fall in the First Division range. Your own school's exact cutoffs may differ, so treat these as starting points rather than guarantees.

It depends on the total number of questions and your school's cutoff for an A. Use the Questions I Can Miss tab above: enter the number of questions and your target grade, and it tells you the minimum correct answers and how many you can afford to miss.

Enter your current grade, how much the final exam is worth, and your target overall grade in the Final Grade Needed tab. It solves for the exact score you need, and lets you know if the target is out of reach even with a perfect score.

Multiply each category's grade by its weight, add those results together, and divide by the total weight. If homework is 20% of your grade at 90%, and your midterm is 30% at 82%, those two categories alone contribute (90ร—0.20) + (82ร—0.30) to your overall weighted grade.

Convert each grade to its grade points using your school's scale (the US Letter Grade option above shows a common one), then take the credit-weighted average across your courses. For a single test or subject, selecting the US scale in the calculator shows the GPA equivalent alongside your percentage automatically.

On the commonly used UK scale, 70%+ is a First Class (1st), 60โ€“69% is an Upper Second (2:1), 50โ€“59% is a Lower Second (2:2), and 40โ€“49% is a Third Class. Individual universities and courses can set their own boundaries, especially for a final degree classification.

The most common formula, used by CBSE and many UGC-affiliated colleges, is Percentage = CGPA ร— 9.5. Some universities, including Anna University and VTU, use ร— 10 or their own formula instead โ€” so confirm which one applies to you before using the number on an application.

Most HEC-recognised universities use a 4.0 GPA scale, with roughly 85%+ as an A (4.0) down to below 50% as an F (0.0). Individual universities can publish slightly different percentage bands in their own handbooks, and school-level boards like BISE Lahore or FBISE use separate rules for Matric and FSc results.

ECTS (European Credit Transfer System) is primarily a framework for comparing grades across European institutions, not a single fixed percentage scale. Grades are usually assigned relative to how a student performed against their cohort. The Europe tab above gives an illustrative percentage comparison, but your university's own ECTS table is the accurate source.

No. The US commonly uses Aโ€“F letter grades with a GPA, the UK uses a degree classification (First, 2:1, 2:2, Third), India and Pakistan report a percentage with a division or an HEC-style GPA, and Europe uses the cohort-relative ECTS scale. Even within one country, individual schools and instructors set their own cutoffs โ€” use the Custom scale option above if none of the built-in scales match yours.

Yes. Use the Marks / Test Score tab for a single exam or a set of subjects, and the Weighted Grade tab when homework, quizzes, midterms, and a final each count differently toward your overall course or school grade.

Yes. Each row can have its own total marks or points โ€” the calculator adds everything together correctly even when the totals differ between subjects.

Yes. It works for a single school test, a college course with weighted categories, or a university module โ€” as long as you know the marks, points, or percentages involved, the calculator handles the arithmetic.

Yes โ€” every mode on this page can be used online without creating an account.